Montgomery (KONE) - Holeless

Head Drawing

Other Versions

Installation Locations in N. America

Cylinder Notes

• Metal ring in bottom of head is removable to access O-rings and wear ring.
• Some older units do not have groove for wear ring; this would be in the metal ring at the level of the O-rings. If the groove is not present, leave the wear ring out.

Packing Sets

Plunger Diameter	Packing Set number
2.84	9EA018-03
3	9EA018-01
3-1/2	9EA018-02

Packing Notes

• Usually need (2) sets per car.
• Metal ring in bottom of head MUST be removed to replace seals

Packing Set Contents

Wiper Bearing
Seal
Wear Ring
O Ring
O Ring

Packing Alternatives

Condition		Recommendation
Leaking		900 Green Loaded Series
Requires Split Seal		800 Series
Damaged Plunger		600 Series